The
Powerplant
The FX Cruiser® High Output is powered by a Yamaha
High Output MR-1™ engine. This 1052cc four cylinder,
four-stroke Yamaha marine engine delivers more power
in a lighter package than any other full-size, four-stroke
normally-aspirated watercraft in the industry.
* Electronic Fuel Injection (EFI):
Four individually adjustable throttle bodies, throttle
position sensor (TPS) and intake air pressure and air
temperature sensors supply the optimum air/fuel mixture.
The results are a smooth, high power output with low
fuel consumption and low exhaust emissions.
* Specially Designed, One-piece Cylinder
and Crankcase Assembly: Provides tremendous engine rigidity
that's lighter and stiffer than two-piece designs.
* Slant Detection Switch: Electronic
switch stops engine and oil pumps immediately if watercraft
becomes overturned, protecting motor from unwanted water
ingestion.
* High Volume Intake Box: With water
repellent air filter and flame arrestors.
* Dry Sump Lubrication: Uses two
engine oil pumps to deliver lubricated oil to each moving
part with water-jacketed sump and oil backflow protection.
* Yamaha Engine Management System
(Y.E.M.S.): An integrated, computerized management system
that controls and adjusts such functions as ignition
timing, fuel injection mapping, engine diagnostics and
off throttle steering. The OTS function of Y.E.M.S.
activates when the operator releases the throttle lever
and attempts to steer the watercraft. This assists the
operator in turning while the watercraft is decelerating.
* Independent Water-jacketed Exhaust
Manifolds with Collector: Achieves high power while
keeping noise and exhaust heat under control.
* Thermostatic and Pressure Controlled
Cooling System: Water flow through the engine is controlled
by a thermostat and pressure system and is maintained
by a pressure control valve.
* Corrosion Protection System: Sacrificial
zinc anodes protect the engine from harmful galvanic
corrosion. Stainless steel fasteners (nuts, bolts, hardware)
provide a long service life. Cylinders, cases and heads
are all treated with a durable oxide coating to form
a barrier between corrosion and expensive engine parts.
* Electronically Controlled, Variable
Ignition Timing: For exact ignition advance control
at all throttle positions and RPMs.
* Direct injection: For more efficient
combustion.
The Jet
Pump Propulsion System
* The FX Cruiser High Output's 155mm hyper-flow jet
pump propulsion system with three-blade stainless steel
impeller is designed to maximize water flow for high
performance. The FX pump configuration provides excellent
hook-up and smooth acceleration.
* Reverse: Allows the watercraft
to be backed up off a trailer or out of tight spots
where you cannot turn around easily.
* Quick Shift Trim System (Q.S.T.S.):
Mechanically operated, this system offers instant change
in the attitude of the watercraft while underway allowing
for tighter turns or quicker acceleration on plane,
as the rider prefers. Q.S.T.S. offers 24 degrees of
total trim range.
* Stainless Steel Impeller Housing
Liner: For high durability, the liner maintains accurate
clearance tolerances between the impeller and the housing.
* High Flow Intake Duct and Grate:
The dynamic shape of these items directs water flow
into the pump for better thrust, performance and hook
up.
* Pumps are Manufactured with YDC30:
A combination of zinc and copper alloys, developed by
Yamaha marine engineers, that offers excellent corrosion
protection.
The Ultra-Lightweight,
High Strength Hull and Deck
* The FX High Output was specifically designed to be
ultra-light. Built from a high-tech SMC material, the
FX Cruiser High Output’s hull is not only the
best-handling hull in its class, but its lighter weight
adds to the FX Cruiser High Output’s best-in-class
power-to-weight ratio.
* Progressive, Stepper Draft V-Hull
with Integrated Bow Spray Guard: Provides excellent
maneuverability, handling and comfort.
* Performance Sponson Design: Provides
added straight-line comfort and an improved two and
three-up riding experience.
Additional
Features:
* Yamaha Cruiser Seat: Yamaha’s innovative Cruiser
seat and handholds provide excellent comfort for the
rear passenger.
* Five-step Adjustable Tilt Steering
System: Allows the rider to adjust the steering column
angle from 55 degrees to 35 degrees.
* Multi-function Electronic Information
Center: Provides the operator a quick read on speed,
RPM, fuel level, low fuel warning, low oil pressure
warning, battery voltage, overheat warning, hour meter,
check engine light with self-diagnostic function and
the industry's only audible warning system.
* Industry's First Remote Controlled
Transmitter: With the touch of a button on Yamaha’s
innovative remote controlled transmitter, you can activate
and deactivate the FX Cruiser High Output's digital
security system and all-new Low RPM Mode from up to
30 feet away.
* Low RPM Mode™: Also with
the touch a button on the remote transmitter, the top
speed of the FX Cruiser High Output is reduced by nearly
30 percent.
* Yamaha Security System: This security
system that can be activated with the touch of a button
ensures that no one starts the FX Cruiser High Output
without your permission.
* 26 Gallons of Total Storage: Includes
a large 19.8-gallon cooler, rear storage tub and glove
box.
* Glove Box with Self-draining Beverage
Holders: The industry's first self-draining beverage
holders.
* Extra Large Boarding Platform:
Provides a stable platform for re-boarding.
* Dual Mirrors: Automotive style
and convenience.
* Finger Throttle Lever: Provides
added comfort while reducing hand fatigue.
* Yamaha's Trademarked Visibility
Spout®: A waterspout from the rear of the craft
that improves the watercraft’s conspicuity.
|
So
while the driver is comfortably accelerating through
turns, the passengers can sit back and enjoy the ride.
